CREATING BOWS with the SINEDOTS I FILTER PI VERSION: 6. LEVEL: Beginners MAIN TOOLS USED: Filters: Formatting Tools NECESSARY DOWNLOADS: This tutorial uses the Dragonfly Sinedots I Filter by Phillip Spoeth . If you need more help with installation: TERMS OF USE: Please Read - Thank You! |
 |
INSTRUCTIONS |
|||
 BOW 1 SETTINGS name bow1 X1 -4.240000 X2 2.230000 Y1 2.230000 Y2 -4.240000 X1-2 4.530000 X2-2 -1.800000 Y1-2 -1.800000 Y2-2 4.530000 BalanceX 0.500000 BalanceY 0.520000 Density 0.750000 Inverse 0 |
 BOW 2 SETTINGS name bow2 X1 -4.240000 X2 1.510000 Y1 1.510000 Y2 -4.240000 X1-2 4.240000 X2-2 -1.800000 Y1-2 -1.800000 Y2-2 4.240000 BalanceX 0.500000 BalanceY 0.520000 Density 0.750000 Inverse 0 |
 BOW 3 SETTINGS name bow3 X1 -3.090000 X2 2.230000 Y1 2.230000 Y2 -3.090000 X1-2 2.090000 X2-2 -1.800000 Y1-2 -1.800000 Y2-2 2.090000 BalanceX 0.500000 BalanceY 0.520000 Density 0.750000 Inverse 0 |
 BOW 4 SETTINGS name bow4 X1 -3.090000 X2 2.230000 Y1 2.230000 Y2 -3.090000 X1-2 2.090000 X2-2 -0.940000 Y1-2 -0.940000 Y2-2 2.090000 BalanceX 0.500000 BalanceY 0.500000 Density 0.750000 Inverse 0 |
|
An easy way to add these codes to the list in the Sinedots Filter 1. Go to the folder where you put the Sinedots Filter files. 2. Find the Sinedots.cfg file. Click on it to open it. 3. When you get the dialog box asking you which program you want to open it with, choose Notepad from the pull-down list. 4. When you read the Notepad file, you will see that all the settings for the presets in Sinedots are listed there exactly the way I have done mine above. 5. Copy and paste each list under the bows (from 'name' to 'Inverse' etc) into the notepad file and Save. When you next open the Sinedots I Filter - all my settings will be in there under the names I have given them. If they do NOT show up, please check that you have installed the filter correctly as per the text file - including activating the AssignPath.exe by clicking on it and assigning the correct path! For more codes you might also like to check out my Sinedots Codes pages! |
 The settings for Bow No. 4 in the Filter.  The resulting image.  The selection - converted to object - before adding Fill.  After adding a gradient fill. |
CREATING A BOW 1. Create a new canvas - 200 x 200 pixels, Colour Black. 2. Click on Selection/All. 3. Click on Effect/Dragonfly/Sinedots. Apply the settings for the bow of your choice from the list above. I have used Bow 4 for the tutorial but the general instructions are the same for each bow. (If you are going to use this bow in future, Save the setting with the name of the bow at this point). Click OK. 4. Click on Format/Data Type/ Grayscale (8-bit). Close the original canvas (without saving). 5. Open a new, white canvas. Click on Selection/Import Selection. Click OK in the box that opens. 6. Right Click/Convert to object. 7. Click on Fill - and fill the selection with the single colour or gradient of your choice. Try various two colour, Multiple and Magic Gradients - some work well - some don't! 8. You can drag your finished bow to the Easy Palette for future use if you wish. Tip: To eliminate 'jaggies' from the edges of your bow, make the bow larger than you are finally going to use it, then use the Transform/Resize Tool to shrink the bow. |
||
|
|
Another version of Bow 3! Using Cut and Paste + Transform Tool/Resize and Rotate to make multiples of the original bow and then combining them in a single bow. |
||
 |
|
||
|
If you need any help - on want to make suggestions to improve this tutorial - or for new ones please EMAIL me! TUTORIAL LIST |
|||
If you came to this page directly cannot see my navigation bar on the left hand side of this page This site © Rosie Hardman-Ixer, 2002 |